Faymonville

Descripción

NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical characteristics MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Own weight: 11,456 kg / Payload approx.: 36,544 kg / Loaded coupling height: 1150->1250 mm / Steering radius: 2300 mm / Loading floor length: 13,600 mm / 2x extendable (2x 770 mm) to 2,900 mm / Wheelbase: 1,810 mm Technical description Extendable loading floor with pneumatic locking / On the central box section there is a fixed intermediate table of + - 250 mm / 8 pair of outward-folding tie-down rings (LC 5,000 daN) / 3 pairs of outward-folding tie-down rings (LC 10,000 daN) / Cutouts in the outer frame for hooking in lashing straps. (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: GoodYear) TPMS: TPMS tire pressure monitoring system compliant with ECE R 141 standards Axles: BPW axles with disc brakes, air-suspended with lift and lower valve. All axles hydro-mechanically forced steering / Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system, according to EU regulations, with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-grade fine-grain steel. Steel grades; **S355J2+N/S355MC (elastic limit 355MPa) / **S690QL/S700MC (elastic limit 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized terminal panel at the front with 24N, 24S & 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Width warning signs: Below the gooseneck and at the rear, on the left and right, a holder for warning signs with a socket. Options included • Front and rear maneuverability via a cable remote control with PDC light control for straightening the axles. (without installation to the tractor) • Electro-hydraulic power unit (approx. 45 kg). • 2 Wheel chocks with holder on the bulkhead. • King pin 2" • A galvanized steel bulkhead, approx. 1600 mm height. EN12642-XL • White reflector tape according to EU regulations along the length and extension. Red at the rear. • EU marking boards (red-yellow) at the rear of the vehicle. • Holder for a plug-in beacon at the rear of the vehicle. • Loading floor consists of a 30 mm hardwood floor, reinforced with omega profiles (approx. 298 kg) • 10 pairs of stake pockets approx. 100 x 50 mm in the outer frame of the loading floor. • 1 spare wheel holder, under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps • 6 pairs of recesses in the loading floor for WADER container locks, for 1x 20' or 2x 20' or 1x 40' or 1x 45' containers • 5 pairs of stake box profiles, transversely mounted in the loading floor, for stakes 100x50mm • galvanized storage space under the loading floor (2390x720x400mm) • rope hooks (8mm), all approx. 500mm below the edge profile of the gooseneck and the loading